ATF And Acetone Vs. PB B’laster

In this article, you will discover a fascinating comparison between ATF and acetone versus PB B’laster. If you’ve ever been faced with a stubborn rusted bolt or a squeaky hinge, you know the importance of having a reliable penetrating oil on hand. ATF and acetone have gained popularity as alternative solutions to the well-known PB B’laster. By exploring their effectiveness, cost-efficiency, and ease of use, this article aims to help you make an informed decision about which product is best suited for your needs. So, let’s delve into the world of penetrating oils and find out the pros and cons of ATF and acetone compared to the tried and tested PB B’laster.

Overview of ATF and Acetone

What is ATF?

Automatic Transmission Fluid (ATF) is a versatile lubricant that is specifically designed to meet the unique requirements of automatic transmissions. It works by reducing friction and heat, thereby prolonging the lifespan of your transmission. ATF is typically red in color and has a relatively low viscosity.

What is Acetone?

Acetone is a colorless, volatile liquid that is commonly used as a solvent in various industries. It is highly effective in dissolving substances such as grease, oil, and paint. Acetone evaporates quickly, leaving little to no residue behind.

Uses of ATF

ATF is primarily used in automatic transmissions of vehicles, where it serves multiple purposes. It acts as a lubricant to reduce wear and tear on various components, prevents overheating, and maintains the hydraulic pressure necessary for smooth gear changes. Additionally, ATF can also be used in power steering systems and some hydraulic systems.

Uses of Acetone

Acetone has a wide range of applications due to its excellent solvent properties. It is commonly used as a degreaser, paint thinner, and adhesive remover. Acetone is also used in the production of various chemicals and as a key ingredient in some nail polish removers.

Overview of PB B’laster

What is PB B’laster?

PB B’laster is a popular and widely-known penetrating oil that is designed to loosen rusted or corroded parts. It is primarily used as a lubricant and rust dissolver in automotive, industrial, and household applications. PB B’laster is well-regarded for its ability to penetrate and free stuck parts with ease.

Composition and Ingredients

PB B’laster is formulated using a unique combination of ingredients, including petroleum distillates, rust inhibitors, and lubricating agents. The specific composition may vary between different product variations, but the main objective remains the same – to provide effective rust penetration and lubrication.

Common Uses

PB B’laster is a versatile product that can be used in a wide range of situations. It is commonly employed to loosen rusted bolts, nuts, hinges, and other metal parts. Additionally, PB B’laster can be applied to prevent corrosion, displace moisture, and lubricate moving components.

ATF And Acetone Vs. PB Blaster

Comparison of ATF and Acetone with PB B’laster

Effectiveness in Lubrication

ATF is specifically designed for use in automatic transmissions, making it highly effective in lubricating the intricate components of a transmission system. It provides optimal lubrication, reducing friction between moving parts and ensuring smooth operation. Acetone, on the other hand, is not primarily intended for lubrication purposes and may not offer the same level of lubricating properties as ATF. PB B’laster, although it has some lubricating properties, is primarily designed for penetrating and freeing rusted parts.

Removal of Rust and Corrosion

While ATF and acetone may have some rust-dissolving properties, PB B’laster is specifically formulated to tackle rust and corrosion head-on. Its penetrating ability allows it to break through rust and corrosion, making it easier to free stuck parts. When it comes to rust removal, PB B’laster is often the preferred choice.

Penetration and Loosening Power

When it comes to penetrating tight spaces and loosening stuck parts, PB B’laster excels. Its unique formulation allows it to penetrate deeply into rusted or corroded surfaces, breaking the bonds that hold parts together. ATF and acetone may have some penetrating powers, but they may not be as effective as PB B’laster in this regard.


In terms of cost, ATF is relatively affordable and widely available, especially considering its versatility as a lubricant. Acetone is also relatively inexpensive, as it is a common solvent. PB B’laster, being a specialty product, may be slightly more expensive than ATF and acetone, but its effectiveness in penetrating and freeing stuck parts justifies the cost for many users.


ATF and acetone are both readily available at most automotive stores and hardware stores. These products are widely used and have become staples in many workshops and households. PB B’laster, while not as commonly found as ATF and acetone, is still widely available in most automotive and industrial supply stores.

Safety Precautions

When handling ATF, it is important to follow the manufacturer’s guidelines and safety precautions. While it is generally considered safe when used as intended, prolonged or excessive exposure to ATF should be avoided. Acetone should be used in a well-ventilated area, as it is highly flammable and may cause skin and eye irritation. PB B’laster should also be used with caution, as it contains petroleum distillates that may be harmful if ingested or inhaled.

Pros and Cons of ATF and Acetone

Benefits of using ATF

  • Excellent lubricating properties
  • Versatile usage in automatic transmissions and hydraulic systems
  • Widely available and affordable

Drawbacks of using ATF

  • Limited effectiveness in rust removal and penetration
  • Not recommended for applications outside of lubrication
  • May require specialized equipment for application

Benefits of using Acetone

  • Effective solvent for grease, oil, and paint
  • Wide range of applications in different industries
  • Relatively inexpensive and easily accessible

Drawbacks of using Acetone

  • Limited lubricating properties
  • Highly flammable and requires proper handling
  • May cause skin and eye irritation

ATF And Acetone Vs. PB Blaster

Pros and Cons of PB B’laster

Advantages of PB B’laster

  • Exceptional rust penetration and loosening power
  • Versatile applications in automotive, industrial, and household settings
  • Can help save time and effort when dealing with rusted or stuck parts

Disadvantages of PB B’laster

  • Comparatively higher cost than ATF and acetone
  • Specialty product, may not be as widely available
  • Contains petroleum distillates that require proper handling and precautions

When to Use ATF and Acetone

Examples of Appropriate Situations

  • ATF: When lubricating automatic transmissions, power steering systems, or hydraulic systems
  • Acetone: Removal of stubborn grease, oil, or paint residues

Recommended Applications

  • ATF: Automotive maintenance, hydraulic system maintenance
  • Acetone: Cleaning surfaces before painting, removing adhesive residues

ATF And Acetone Vs. PB Blaster

When to Use PB B’laster

Suitable Applications

  • Loosening rusted or corroded bolts, nuts, hinges, or other metal parts
  • Preventing corrosion and displacing moisture in various settings

Precautions and Limitations

  • Use in a well-ventilated area due to petroleum distillate content
  • Avoid contact with skin, eyes, and ingestion to prevent potential harm

Using ATF and Acetone Together

Purpose of Mixing ATF and Acetone

Mixing ATF and acetone can create a unique blend with enhanced penetrating and lubricating capabilities. The acetone helps to break down any surface contaminants, allowing the ATF to penetrate more effectively. This mixture can be particularly useful in situations where both lubrication and rust penetration are required.

Proper Ratios and Mixing Instructions

The ratio of ATF to acetone can vary depending on the specific application. It is recommended to start with a 50/50 mixture and adjust the ratio as needed. Thoroughly mix the ATF and acetone in a suitable container before using. It’s important to note that the resulting mixture may have different characteristics than either ATF or acetone alone, so experimentation and caution are advised.

Alternatives to ATF and Acetone

Other Lubricants

There are a plethora of lubricants available in the market, each with its own set of advantages and applications. Some common alternatives to ATF include gear oils, motor oils, and greases. These alternatives may be better suited for specific applications, depending on the requirements and preferences of the user.

Rust Penetrants and Dissolvers

Aside from PB B’laster, there are several other rust penetrants and dissolvers available. These products often have similar properties and uses, such as loosening stuck parts and removing rust. Some popular alternatives to PB B’laster include WD-40, Liquid Wrench, and CRC Freeze-Off.

Comparative Benefits

The choice between ATF and acetone, or PB B’laster, largely depends on the specific task at hand. Both ATF and acetone excel in their respective areas of lubrication and solvent-based applications. PB B’laster, on the other hand, is specifically formulated for rust penetration and loosening stuck parts. Understanding the distinct properties and benefits of each product helps determine the most suitable option for a particular situation.


In conclusion, ATF, acetone, and PB B’laster all have their unique set of characteristics and applications. ATF is ideal for lubricating automatic transmissions and hydraulic systems, while acetone is a versatile solvent widely used for degreasing and paint removal. PB B’laster, on the other hand, is specifically designed to penetrate rust and free stuck parts. Each product has its pros and cons, and it is important to consider factors such as effectiveness, cost, availability, and safety precautions when choosing the appropriate option for a given task.

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.